Rane TTM57SL

Descriptions détaillées

• The TTM 57SL Performance Mixer integrates Serato Scratch Live with the best of Rane's hardware. Now you can control Scratch Live from your mixer without touching your laptop!

SCRATCH LIVE CONTROL SURFACE

• Navigate through your library, load tracks, hit cues, loop and control effects all from the mixer's control panel.

FUTURE PROOF

• The features and functionality of your mixer will improve with each new release of Scratch Live software — and all Scratch Live updates are free!

ADVANCED RECORDING

• Record your mix directly to hard drive, or record two analog sources simultaneously.

EFFECTS

• 24-bit effects using Rane and Serato's award-winning studio and live sound software technologies, giving you professional studio-quality sound.

MAGNETIC FADERS

• Rane's legendary patented magnetic faders are the fastest, most accurate, and longest-lasting on the planet.

EXTERNAL AUDIO INTERFACE

• Use the TTM 57SL as a high-quality USB audio interface for your favorite Mac or PC software.

SIMULTANEOUSLY:

• Play a combination of digital and analog sources.
• Play up to two digital files controlled by vinyl or CD while recording your mix.
• Or, digitize two vinyl records or analog sources simultaneously.
• Cue analog and digital sources.
• Operate standalone as a no-compromise performance mixer.

FEATURES

• Four individually switchable Phono/Line inputs, plus a stereo aux input. 
• Two input buses, each selects two analog & two digital sources. 
• Input Gain, Left / Right Pan controls, and 3-band full-cut EQ with kill switches. 
• Mic input with Level and High / Low Tone controls. 
• Rane’s FlexFX effects loop system, plus built-in digital effects. 
• Rane’s patented magnetic faders are the most accurate and longest-lasting available. 
• Independent Contour & Reverse controls with Channel Swap. 
• Both 1⁄4 Ì‹ and 3.5 mm headphone output jacks on the front. 
• RCA, TRS & XLR outputs, each with dedicated level controls. 
• USB 1.1 with 8 channels of streaming 16 bit / 44.1 kHz audio. 
• Programmable foot switch input (up to 3 buttons; not included). 
• Universal internal power supply works anywhere in the world (100-240 VAC).

TTM 57SL Specifications

Parameter : Specification : Conditions & Comments
Analog Inputs: 4 Stereo, Unbalanced RCA jacks:
Phono or line level input
Phono Response: RIAA ±1 dB, Gain: 30 dB at 1 kHz
Max input 133 mV
Input Impedance: 47.5k Ω, 200 pF
Line Gain: +15 dB to off @ 1 kHz
Auxiliary Input: Stereo Unbalanced RCA jacks
Gain: Off to +6 dB
FlexFX Return: Stereo Unbalanced 1/4" TS (tip-sleeve) phone jack
FlexFX Send: Stereo Unbalanced 1/4" TS phone jack
Mic Input: Active Balanced: 1/4" TRS (tip-ring-sleeve) phone jack
Input Impedance: 511Ω, each leg to ground
Gain: 50 dB 1 kHz
Frequency Response: 30 to 20 kHz +0, -3 dB, max gain
CMMR: >40 dB 1 kHz, max gain
S/N: 76 dB Re 0 dBFS, max gain, 20 kHz BW
Tone Controls: 2-Band
Master/Booth Outputs: Stereo balanced XLR/TRS jacks
Frequency Response 15 Hz to 20 kHz +0, -3 dB
THD+N <0.005% re 0 dBFS, 20 to 20 kHz, 20 kHz BW
S/N (balanced output) 102 dB re 0 dBFS, A-weighted
Auxiliary Output: Stereo Unbalanced RCA jacks
General Specifications:
Maximum Input (all inputs): 4Vrms
Maximum balanced output (main and booth): 8Vrms
Maximum unbalanced output (FlexFx and AUX): 4Vrms
Mixer digital audio: 24-bit, 44.1 kHz, 102 dB dynamic range
USB digital audio: 16-bit, 44.1 kHz, 102 dB dynamic range
Crosstalk: -75 dB re 0 dBFS, 1 kHz
Universal Power Supply: 100 to 240 VAC, 50 Hz to 60 Hz 
USB Power: Mixer is self-powered. 
Unit: Size: 13.3"H x 10"W x 3"D (33.8 x 25.4 x 7.7 cm)
Weight: 8.5 lb (3.8 kg)
Unit: Shipping Size: 7.75"H x 12.75"W x 19.25"D (19.7 x 32.5 x 49 cm)
Shipping Weight: 12 lb (5.5 kg)
Note: All specifications are typical unless otherwise stated.

 

Internal LFO Filter and Echo Effects with six possible insert points

Pre- or Post-channel faders for Program 1 and Program 2

Main Mix

Auxiliary Input Bus

8 Channels of Streaming Audio

16 bit / 44.1 kHz Streaming Audio

Four channels from computer

Stereo source Digital 1 and Digital 2

Four channels to computer

Stereo Record 1 and Record 2

Stereo Recording

Record 1 and Record 2 may record:

Pre- or Post-channel faders for Program 1 or Program 2

Main Mix

Auxiliary Input Bus

Vinyl / CD Control Inputs

Stereo Record 1 may be used for 4-channels of control

Select Analog 1 or Analog 2 for Control Input 1

Select Analog 3 or Analog 4 for Control Input 2

USB firmware updates

Internal universal switching power supply (100-230 VAC)